Vehicles, Equipment, Materials from R & L Doors

All items closed
Page 1 of 3    
Previous Page|Next Page
Grid with imagesList view
This is one bidding increment above the
current bid on this item. The bidding increment
is determined by the amount of the current bid.

The table below explains how bid increments
are calculated.

LowHighIncrement
$0.00$101.00$5.00
$101.01$1,000.00$10.00
$1,000.01$5,000.00$50.00
$5,000.01$50,000.00$100.00
$50,000.01$100,000.00$500.00
$100,000.01$100,000,000.00$1,000.00
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

1999 GMC C6500 Box Truck

  • VIN: 1GDJ7H1B3XJ519476
  • CA License: 6D45655   Expired: 10/31/2011
  • Odometer: 251,923
  • Axles: 2
  • Tire Size: 295/75R22.5
  • Dual Rear Wheels
  • Fuel: Unleaded Gasoline
  • (2) 50 Gallon External Gasoline Tanks
  • Engine: 7.4 Liters V8
  • Transmission: Manual 6 Speed
  • GVWR: 25,950 lbs.
  • Box Details:
    • Dimensions: 22.5' L x 7.5' W x 107" H
    • Manufacturer: Grumman Olson
    • Date: October 1999
    • Roll up rear door
  • Contents of truck are included with this lot. Some of these items include:
    • Office desks
    • Chairs

Note: A California Certificate of Title will accompany this vehicle. Certified court document required for registration will be mailed out 6-8 weeks after the auction. Buyer is responsible for any smog, registration and late fees due DMV.

1994 GMC Topkick Box Truck

  • VIN: 1GDG6H1P0RJ507524
  • CA License: 5C09088   Expires: 6/30/2012
  • Odometer: 292,870
  • GVWR: 20,660 lbs.
  • Axles: 2
  • Tire Size: 225/70R19.5
  • Dual Rear Wheels
  • Transmission: Manual 6 Speed
  • Fuel: Unleaded Gasoline
  • (2) External 35 Gallon Gas Tanks
  • Interior Details:
    • Vinyl Seats
    • Heater and Air Conditioning
    • FM Stereo
    • Manual Windows and Locks
  • Engine: 6.0 Liters V8
  • Box Details:
    • Manufacturer: Dailey Body
    • Date: June 1995
    • Serial Number: 64816
    • Dimensions: 18' L x 8' W x 104" H
Note: Vehicle does not start but does turn over. The wood doors located in the box of this truck are sold separately in Lot 104. A California Certificate of Title will accompany this vehicle. Certified court document required for registration will be mailed out 6-8 weeks after the auction. Buyer is responsible for any smog, registration and late fees due DMV.

1995 GMC Sierra Pick-Up Truck

  • VIN: 2GTEC19H7S1580964
  • License: 5F11645   Expires: 10/31/2012
  • Odometer: 233,383
  • GVWR: 6,200 lbs.
  • Transmission: Automatic
  • Tire Size: LT235/75R15
  • Interior Details:
    • Cloth Seats
    • Heater and Air Conditioner
    • AM/FM Stereo
    • Cassette Player
  • Seats (6)
  • Engine: 5.0 Liters V8
  • Stepside Bed
  • 2-Wheel Drive
  • Tow Package
  • 2-Door
Note: Power locks and manual windows are damaged. A California Certificate of Title will accompany this vehicle. Certified court document required for registration will be mailed out 6-8 weeks after the auction. Buyer is responsible for any smog, registration and late fees due DMV.

1980 16' Utility Trailer with Wood Stock

  • VIN: 0G0577
  • CA License: 4BE9479 Exp.: 4/30/2007
  • Axles: 2
  • Tire Size: H78-15LT
  • Ball Hitch Size: 2"
  • Wood Floor
  • Approximate Dimensions of Trailer Bed: 16' L x 62" W x 23" H
  • Approximate Dimensions with Hitch and Tires: 244" L x 82" W x 45" H

Note: A California Certificate of Title will accompany this trailer. Certified court document required for registration will be mailed out 6-8 weeks after the auction. Buyer is responsible for any smog, registration and late fees due DMV.

(40+) Wood Doors

  • Various Sizes
Note: Doors are located in the vehicle sold in Lot 101. These doors must be removed before 12:00 pm (PT) on Tuesday, May 1, 2012.
Note: A California Certificate will accompany this vehicle. Certified court document required for registration will be mailed out 6-8 weeks after the auction. Buyer is responsible for any smog, registration and late fees due DMV.

Wood Stock, Door Handles, Tools

All of the items photographed are included in this lot. Some of these items include:

  • (2) Pallets of Wood for Doors
    • Frames
    • Doors
    • More
  • Tools in Tool Box
  • Various Door Handles
  • Boxes of Silicone Door Seals
  • Iron Door Handles
  • Cabinet Rollers
  • Ingersoll Rand Lock Hardware
  • Baldwin Locks
  • Much, much more!

Wood Doors, Door Hardware, Door Knobs

All of the items photographed are included in this lot. Some of these items include:

  • Wood Doors
  • Box of Ashby Norton Door Knobs
  • Yale Door Openers
  • Box of Yale Latches
  • Box of Schlage Door Knobs Latches
  • Boxes of Weiser Door Knobs
  • Newman Task Door Knobs
  • (13+) Bathroom Mirror/Cupboard Units
  • Door Hardware
  • More! 

Wood Doors, Door Hardware, Locks

  • (3) Stacks of Wood Doors
  • (6+) Bathroom Mirror/Cupboard Units
  • (10+) Schlage Door Knobs
  • Miscellaneous Door Knobs and Locks

1982 Ford F350 A-Frame Utility Truck

  • VIN: 1FDJF37ZXCRA07560
  • California License: 2C55753 Expired: 4/30/2007
  • Odometer: 52,417
  • GVWR: 4,000 lbs.
  • Tire Size: 7.50-16LT
  • Fuel: Unleaded Gasoline
  • Engine: 
    • 6.6 Liters
    • V8
  • Transmission: Manual 5 Speed
  • Interior Details:
    • Vinyl Seats
    • Heater and Air Conditioner
  • Bed Dimensions: 18' L x 94" W
  • Vertical Rack Dimensions: 202" L x 61" H
Note: A California Certificate of Title will accompany this vehicle. Certified court document required for registration will be mailed out 6-8 weeks after the auction. Buyer is responsible for any smog, registration and late fees due DMV.

Toyota Gasoline Powered 8,500 lb. Forklift

  • Model: 40-3FG26
  • Capacity: 8,500 lbs. (3,860 kg)
  • Pneumatic Tires:
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.90/6.00-9
  • Maximum Mast Height: 9' (3,000 mm)
  • Hours: 1,662
  • Manual with Clutch
  • (2) Gears
  • Forward/Reverse
  • No Side Shift

Note: This forklift have been reserved by auctioneer and will available for removal between 3:00 pm and 4:00 pm (PT) Tuesday, May 1, 2012.

Norfield Industries Magnum 95 Signature Series Door Machine

  • Serial Number: DJ236895
  • Phase: 3
  • Total HP: 12.2
  • Approximate Dimensions: 1' L x 46" W x 90" H
  • Heavy Duty Rolling Cart is included
  • (2) DeWalt Router
  • (2) Pneumatic Drill 

Norfield Magnum Door Machine

  • Serial Number: DJ-597-M
  • 3 Phase and Single Phase Motor
  • Approximate Dimensions: 200" L x 40" W x 89" H
  • (2) DeWalt Routers
  • (2) Pneumatic Drills
  • Rolling Cart is included

Norfield 1020 Trim Saw Machine

  • Model: 1020
  • Serial: TS1433K
  • Phase: 3
  • Approximate Dimensions: 143" L x 60" W x 53" H

American Wood Working Machinery Planer

  • Model: Not available
  • Phase: 3
  • Approximate Dimensions: 132" L x 34" W x 39" H
  • Unit is solid steel

Delta Portable Dust Collector

  • Model: 50-760
  • Phase: 1
  • Approximate Dimensions: 40" L x 19" W x 78" H
  • Bag is missing

Delta Triple Duty Ball Bearing Grinder

  • Phase: 3
  • HP: 1/2
  • Frame: 165

PowerMatic 27 Shaper Machine

  • Model: 27
  • Serial Number: 9727423
  • Phase: 1
  • Dust collector hose is included
  • Approximate Dimensions: 42" L x 41" W x 64" H

Multiplex B-60 14" Sliding Saw

  • Model: B-60
  • Phase: 3
  • Approximate Dimensions: 45" L x 29" W x 71" H
  • Manufacturer: Red Star Products Inc.
  • Fuse box is included
  • Unit is solid steel

Buss Machine Works 24" Planer

  • Approximate Dimensions: 61" L x 53" W x 61" H
  • Manufacturer: Buss Machine Works
  • Adjustable unit height
  • Hi and low setting
  • Serial Number: Not available
  • Unit is solid steel

EMA FV90 Single Spindle Shaper

  • Phase: 3
  • Approximate Dimensions: 37" L x 29" W x 40" H

Delta 10" Table Saw

  • Serial Number: 11.3-108
  • Saw Blade Size: 10"
  • (3) Dayton Electric Motors included
  • Phase: 3
  • Approximate Dimensions: 78" L x 31" W x 33" H

Delta Milwaukee 12" Table Saw

  • Serial Number: 2342-A
  • Manufacturer: Rockwell Manufacturing Company
  • Phase: 3
  • Approximate Dimensions: 59" L x 42" W x 34" H

16" Radial Arm Saw

  • Model: 3541
  • Type: 4
  • Nos: 3541,3546
  • Manufacturer: The Original Saw Company
  • Approximate Dimensions: 44" L x 42" W x 65" H
  • Needs table top

Norfield 250M Strike Jamb Router

  • Serial Number: SR1346
  • Model: 250M
  • (1) DeWalt Router
  • Phase: 1
  • Approximate Dimensions: 100" L x 24" W x 50" H

Unfinished Doors

(30+) Doors
Dimensions: 79" L x 30" W


Note: Rack is not included. Updated 4/23/12 10:55am.

Delta 10" Table Saw

  • Serial Number: 1241845
  • Table Dimensions: 6' L x 30" W
  • No Guard

Powermatic 6' Cabinet Saw

  • Model: 66
  • Serial Number: 00120664173
  • Left Tilt Cabinet Saw
  • HP: 3

Packard Precision Drill Press with Metal Bench

  • Model: DP514
  • 1/2" Chuck
  • Serial Number: 27603
  • Manufacturer Date: 1978
  • 12" Platform
  • Height: 40"
  • Base Dimensions: 18" L x 10" W
  • Bench Dimensions: 25" L x 17" W x 30" H

Timesaver Speedbelt 2 Speed Sander

  • Model: 252
  • Serial Number: 9920
  • Total Weight: 9,500 lbs.
  • Belt Width: 52"
  • HP: 30
  • Motor: US Electric Motor
Note: Buyer is responsible for all aspects of removal.

Torit Cyclone Dust Collector

  • Model: 20-5-FB-255
  • Serial Number: J-464
  • Phase: 3
  • Metal Frame
  • Dimensions: 36" L x 36" W x 66-1/2" H

Torit Dust Collector with Hopper Base

  • Model: 24-FB-H
  • Serial Number: J-463
  • Phase: 3
  • HP: 7.5
  • Hopper Base: 60" L x 60" W x 6' H
  • Leg Height: 73"

Campbell & Hausfeld Air Compressor

  • Model: TF430821H
  • Manufacturer Date: November 4, 1983
  • Serial Number: 67732
  • Engine Number: TF121067
  • Bolted onto pallet

Cabinet with Dado Knives

  • Assorted Sizes
  • Assorted Patterns

Woodtek Mortiser 82-788

  • Model: 82-788
  • Date Code: 1995
  • Serial Number: B30183060
  • Approximate Dimensions: 3' L x 16" W x 4' H
  • Metal Base

(2) Ryobi Sanders on Rolling Cart with Drawers

  • (1) Ryobi BD 4600 Disc Sander
    • 4" x 6"
    • Serial Number: W0635155904
  • (1) Ryobi 0SS500 Sander
    • Serial Number: 24107534
  • Cart Dimensions: 4' L x 19" W x 34" H

Scaffolding, Metal Cabinet, Plywood

  • Scaffold:
    • 4 Braces
    • Dimensions: 2.5' W x 6' H
  • Cabinet:
    • 3 Cubbie Holes
    • 2' W x 6' H
  • All items photographed and contents of cabinets are included:
    • Miscellaneous Pegboard
    • Sheets of Plywood
    • Hardware

Page 1 of 3    
Previous Page|Next Page
Grid with imagesList view