Online Auction of Forklift, CNC Machines, Shop Tools, and More

Online bidding on this auction starts Tue, Dec 18

 

This sale is sure to hammer a few deals home. This Online Auction of Forklift, CNC Machines, Shop Tools, and more located in the East Bay Area features 32 lots including a forklift, CNC machines, 3D printer, dust collector, tools, and more. We're selling you the tools so you can finish the job, so don't forgo this no-reserve auction because everything will be sold regardless of price!

Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0$101$5
$101$1,000$10
$1,000$5,000$50
$5,000$50,000$100
$50,000$100,000$500
$100,000$100,000,000$1,000
LowHighIncrement
$0$100,000,000$1
Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

2014 Hyster S155Ft 15,500 Lb. Capacity Diesel Forklift

  • Hyster S155Ft 15.5K Forklift
  • Serial G024V01888M
  • Year: 2014
  • Hour Meter Reads: 1762
  • Kubota V3800-Cr-T Turbo Diesel Engine
  • Sideshift Carriage

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Spinner SB-CNC Lathe

  • Year: 2010
  • Spinner Sb-CNC Compact Ultra-Precision CNC Gang Slide Lathe
  • Made In Germany
  • Fanuc CNC Control
  • 5C Collet Nose
  • 7’6”X3’ Floor Space For Machine

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Directed Light Nd:Yag 4-Axis Laser Cutting System

  • Directed Light Model Y-1500-1-1800 4-Axis Cnc Laser Cutting System With:
  • 181 Engineering Cnc Motion Controller
  • Lee Laser Power Supply And Nd:Yag Laser Head
  • Aerotech Adr200 Air Bearing 4Th Rotary Axis

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Femco Hl-35 CNC Turning Center, Year 2004

  • Femco Hl-35 Cnc Turning Center
  • 10” Chuck, 3” Bore
  • Max. Swing Over Bed: 19.69”
  • Max. Turning Diameter: 14.17”
  • Center Distance: 30”
  • Max. Turning Length: 26.57”
  • Spindle Speed: 4,000 Rpm
  • Turret Positions: 12
  • Rapid Traverse Rates: 787 Ipm (X) And 945 Ipm (Z)
  • Main Motor Drive: 25 Hp
  • Fanuc Oi-Tc Control
  • Programmable Tailstock
  • Tool Presetter
  • Chip Conveyor
  • Includes manuals and turret tooling.
  • Machine is in good running condition with no problems, see video of operation.

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Stratasys 3D Printer Dimension SST

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Item Location: 3305 Edison Way, Fremont, CA 94538
Click to view Item Photo Gallery

Item Description:

AirFlow Systems Dust Collector

  • AirFlow Systems DC4-DUST DRAWER-MS Dust Collector Filtration Unit
  • NOTE: unit located in Fremont, CA

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Fanuc 0M CNC Controller, 4-Axis, with Motors and Stage

  • Fanuc 0M 4-Axis Cnc Control
  • Qty. 4 Fanuc A06B-0532 Precision Brushless Ac Servo Motors
  • Motion Stage With Linear Rails And Leadscrews

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Greenlee 855 Power Conduit Bender

  • Greenlee Model 855 Smart Bender
  • Powered Conduit Bender With Programmable Control
  • Note: Needs Board Repair

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

CK Wire Fed Tig Wire Feeder Wf-1

  • CK model WF-1 cold wire feeder with water cooled TIG torch and accessories.
  • This allows for constant and pulsed feeding of TIG wire into the weld puddle automatically.

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Olympus Borescopes Industrial Bore Inspection

  • Set Of Olympus Borescopes:
  • Iv12D2 Steerable Tip Bore Scope
  • Iv6C6-35 Steerable Tip Bore Scope
  • Iv8C6-35 Steerable Tip Bore Scope (Damaged)
  • Iv-4 Light Unit
  • Ilv-C1 Light Unit
  • Ilv-2 Light Unit
  • Ovd2 Display

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Snap-On IM-5 1/2” Drive Air Impact

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Rodac 501 3/8” Drive Air Ratchet

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Snap-On Im-3 3/8” Air Butterfly Impact

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Thor Power Tools Air Screwdriver Gun

  • Model: 10150A 
  • 1/4”-Hex Drive

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Air Angle Grinder/Wire Wheel

  • Air Powered Angle Grinder with Wire Wheel

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Chicago Pneumatic 1/2” Air Impact Gun

  • Chicago Pneumatic 1/2” Drive Air Impact Gun

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Rockwell 1/2” Air Impact Gun

  • Rockwell 1/2” Drive Air Impact Gun

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Suntech Air Die Grinder

  • Suntech Air Powered Die Grinder with 1/4” Collet

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Ingersoll Rand 3/8” Air Impact Gun

  • Ingersoll Rand 3/8” Drive Air Impact Gun

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Sioux Tools Air Screwdriver Gun

  • Sioux Tools 1/4”-Hex Drive Air Screwdriver Gun

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Item Location: 2701 Orchard Pkwy, San Jose, CA 95134
Click to view Item Photo Gallery

Item Description:

Snap-On PDR-5A Air Drill

  • Snap-On PDR-5A Air Drill
  • 1/2” Drill Chuck

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Air Ratchet, 3/8” Drive

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Snap-On Tool Box

  • Snap-On 9-Drawer Ball Bearing Slide Tool Box

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Demagnetizer

  • Electromagnetic Demagnetizer

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Master Heat Gun

  • Model HG-751B

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Pioneer Photo-Tach

  • Pioneer optical tachometer
  • Model 1030

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Magnetic Indicator Base

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Propane Torches, Solder and Plumbing Tools

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Sony Trinitron Monitor and Scienscope Video Camera

  • Sony Trinitron color video monitor with Scienscope camera

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Angle Fixture

  • Custom made angle fiture, possibly for gem lapping or similar operation

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

CompAir Cyclon 345SR Rotary Screw Air Compressor

  • 50KW Motor (Approx. 65HP)
  • Note: Unit located in San Jose.
  • Note: Not operational. Pump needs rebuild and has been removed, but is included.

Note: Photo(s) and description have been provided by the Seller.

Soft closes in effect: i
Item Location: 2701 Orchard Pkwy, San Jose, CA 95134
Click to view Item Photo Gallery

Item Description:

Advance Convertamatic Floor Sweeper

  • Advance Convertamatic 260B electric floor sweeper.
  • Note: Unit located in San Jose.
  • Note: Not operational.

Note: Photo(s) and description have been provided by the Seller.


Please wait...