Surplus Auction of Press Brake Tooling Dies

Bidding Now! - ends Thu, Apr 9 at 11:00:00 am
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0$101$5
$101$1,000$10
$1,000$5,000$50
$5,000$50,000$100
$50,000$100,000$500
$100,000$100,000,000$1,000
LowHighIncrement
$0$100,000,000$1
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Two-Sided Multi Tier Rolling Press Brake Die Rack with Inside Shelves (rack only)

  • Multi tier
  • Shelving inside
  • Rolling
  • Two-sided
  • 7 1/2” casters
  • Left to right 8 foot
  • 7' Tall
  • 5' Wide
  • Rack only, dies not included
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

One Sided Press Brake Die Rack (rack only)

  • Dimensions:  
    • Left to right 8’ 
    • Front to Back 38”
    • Height 63” 
  • One sided press brake die rack
  • Rack only, contents not included
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Flattening Die 10’ x 2-7/8” - Press Brake Tooling 10’ x 2-7/8”

  • Flattening dies
  • 1/2” tang
  • Each die is 10’ long
  • 2-7/8” wide
  • Total height with tang 3-3/8”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x 1.2”

  • 1/2” tang
  • Overall height 3.5 with tang
  • 1.2 wide
  • V opening .600
  • Overall length 12ft 6in
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’x1.950”

  • 1/2” tang
  • Top v opening .840
  • Total height with tang 2.825
  • Width 1.950
  • Dies is stamped 5/8
  • Overall length 12 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ x 1.450”

  • Stamped 3/8
  • 1/2” tang
  • Overall height with tang 3.450
  • Width 1.450
  • Overall length 12 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ x 1.950”

  • Die stamped 5/8
  • Overall height with tang 2.890
  • Width 1.950
  • V opening .850
  • Overall length 12 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x 1.210”

  • 1/2” tang
  • V opening .675
  • Overall height 3.515
  • Width 1.210
  • Overall length 12 foot 6 in
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ x 1.970”

  • 1/2” tang
  • Die stamped 9/16
  • Overall height with tang 2.855
  • Width 1.970
  • Overall length 12 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 5’ x 1.880”

  • 1/2” tang
  • Hemming die
  • Total height with tang 3.140
  • Width 1.880
  • Overall length 5 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 14’ 6” x 1.2”

  • 1/2” tang
  • Knife die
  • Overall length with tang 4.370
  • Width 1.2
  • Overall length 14 foot 6in
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ x 1.430”

  • 1/2” tang
  • Die stamped 3/8
  • Overall length with tang 3.465
  • Width 1.430
  • Overall length 12 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Knife Die 12’6” x .965”

  • 1/2” Tang
  • Knife die
  • Overall height with tang 2.375
  • Width .965
  • Overall length 12 foot 6 in
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Knife Die Tooling 12’ 6” x .970”

  • 1/2” tang
  • Knife die
  • Total height with tang 2.470
  • Width .970
  • Overall length 12 foot 6 In
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 10’ x 12”

  • Knife die
  • Overall height 5.675
  • Width 12”
  • Overall length 10 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Hemming Die Tooling 10’ 2” x 1.4”

  • 1/2” tang
  • Hemming die
  • Overall height with tang 3.125
  • Width 1.4
  • Overall length 10 foot 2 in
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 8’ x 1.475”

  • 1/2” tang
  • Dies stamped 1/2
  • Overall height with tang 3.530
  • Width 1.475
  • Overall length 8 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 74 1/2” x 1.5”

  • 1/2” tang
  • Overall height with tang 3.340
  • Width 1.5
  • V opening .5
  • Overall length 74 1/2”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x 1.125”

  • 1/2 Tang
  • Flattening die
  • Overall length with tang 3.980
  • Width 1.125
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 8’ x 1.5”

  • 1/2” tang
  • Die stamped 1 1/2”
  • Overall height with tang 3.5
  • Width 1.5
  • overall length 8 foot
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 8’ x 2”

  • 1/2” tang
  • Overall height with tang 2.8”
  • Width 2”
  • Overall length 8’
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 10’ 2” x 1.9”

  • 1/2” tang
  • Height with tang 2.835
  • Width 1.9
  • Overall length 10’ 2”
  • V opening 1.5
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Pair of Press Brake Dies 

  • Sizes:
    • 9’ x 3 3/4” 
    • 9’ x 2.375
  • 1/2” Tang
  • Overall with tang 3.750
  • Width 3.8
  • Overall length 9’
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Various Press Brake Tooling Approximate 240 Feet

  • 1/2” Tang
  • Average 10-12’ each
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Various Press Brake Dies with Rolling Cart Approximate 56'

  • 1/2” tang
  • Various press brake does includes rolling cart
  • Cart is 4’ x 20"W x 31"T
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ x .880

  • 1/2” tang
  • Height with tang 2.365
  • Width .880
  • V opening .350
  • Total length was 12’
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x 1.125”

  • 1/2” tang
  • Height with tang 1.880
  • Width 1.125
  • V opening is .600
  • Total length is 12’ 6”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 7” x .915

  • 1/2” tang
  • Height with tang 2.375
  • Width .915
  • V opening .250
  • Total length is 12’ 7”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 3” x .980

  • 1/2” tang
  • Height with tang 2.390
  • Width .990
  • V opening .400
  • Total length 12’ 3”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x 1.210

  • 1/2” tang
  • Height with tang 2.470
  • V opening .5
  • Total length 12’ 6”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x .980

  • 1/2” tang
  • Height with tang 2.470
  • Width .980
  • V opening .4
  • Total length 12’ 6”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 7” x .880

  • 1/2” tang
  • height with tang 2.350
  • Width .880
  • V opening .350
  • Total length 12’ 7”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x .970

  • 1/2” tang
  • Height with tang 2.350
  • Width .970
  • V opening .400
  • Total length 12’ 6”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 12’ 6” x 1.4

  • 1/2” tang
  • Height with tang 2.33
  • Width 1.4
  • V opening 1.125
  • Total length 12’6”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 6’ 6” x .975

  • 1/2” tang
  • Height with tang 2.460
  • Width .975
  • V opening .250
  • Total length 6’ 6”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Tooling 8’ 2” x 1.475

  • 1/2” tang
  • Height with tang 2.940
  • Width 1.475
  • V opening .5
  • Total length 8’ 2”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Straight Precision Straight Edge 

  • Precision straight edge 12 foot
  • Dimensions: 12’ x 2 3/8” x Height 5 13/16 
  • Quantity (1)
  • Unit is on top of rack
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Dies Set 11’ x 1.9

  • 1/2” tang
  • Press break set
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Die Set 12’ x 1.960

  • 1/2”tang
  • Height with tang 2.870
  • Width 1.960
  • Stamped 11/16
  • Total length 12’
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Die Set 8’ 3” x 1.220

  • Press brake die set
  • 1/2” tang
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Die 12’6” x 0.875

  • 1/2” tang
  • V opening 1/2”
  • Width .875
  • Total length 12’ 6”
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Die 12’ x 1.960

  • 1/2” tang
  • Die stamped 9/16
  • Height with tang 2.875
  • Width 1.960
  • Overal length 12’
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Die Set 13’ 3” - 12’ 6” Right to Left

  • 1/2” tang
  • Press brake Die set
  • 13’ 3” - 12’ 6” Right to Left
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Press Brake Die 6’2”x1.125

  • 1/2” tang
  • Overall with tang 4.070
  • Width 1.125
  • Total length is 6’ 2”

Please wait...