Item Description:

Hyster H80XM 6,950 lb. Capacity Propane Forklift

Note: Forklift has been reserved by Auctioneer and will be available for pickup Thursday, September 26th, 2019, from 2:00 pm to 3:30 pm. This unit will be used during the removal period, therefore the hours below are an approximate guideline. 

• Model: H80XM
• Serial: K005D038S5X
• Hour meter reads: 3,444
• Features: Tilt, Side Shift
• Max lift height: 207”
• 6’ Forks
• Tire type: solid rubber
• Front tire: 250/70-15
• Rear tire size: 7.00-12
• Engine V6

Item Description:

Toyota 7FGKU40 8,200 lb. Capacity Propane Forklift

Note: Forklift has been reserved by Auctioneer and will be available for pickup Thursday, September 26th, 2019, from 2:00 pm to 3:30 pm. This unit will be used during the removal period, therefore the hours below are an approximate guideline. 

• Model: 7FGKU40
• Serial: 71691
• Lift height: 131.5”
• Fork length: 5’
• Hour meter reads: 7775
• Features: Tilt, side shift, power fork adjustment
• Front Tire Type: Solid 250-15
• Rear tire type: Pneumatic 7.00-12

Item Description:

2007 International 4300 25' Stake Side Flatbed Truck with Liftgate

• VIN: 1HTMMAALX7H519625
• License: 19920K1
  • Registration Expiration Date: 12/31/2019
• Engine: International D220 7.6L inline 6 diesel
• GVWR: 25,999lbs
• Odometer reads: 324,044
• Transmission: Automatic
• Air brakes
• AirRide driver seat
• Vinyl bench seat
• A/C
• Heated mirrors
• Fog light
• Rear work light
• CD player, AM/FM stereo
• Leaf spring suspension
• Maxon 3000lbs capacity liftgate
• Deck size: 25’ × 7-1/2’, duel rear wheel
• (2) 55gal side-mounted diesel tanks
• Side-mounted toolbox
• Clean air idle
• (6) Bed mounted tiedown rachets
• Tire size: 11R22.5

Note: Certificate of Title and Transfer form will be mailed 3-4 weeks following the close of the auction. Buyer is fully responsible for all aspects of registration and fees due to DMV. 

Item Description:

1995 Isuzu Diesel Stake Side Flatbed Truck with Liftgate

• VIN: JALF5A129S3701749
• License: 5K88309
  • Registration Expiration Date: 3/31/2020
• Engine: Isuzu 6HE1XN
• GVWR: 19,500lbs
• Odometer Reads: 344,089
• Transmission: Automatic
• Air brakes
• Cloth upholstered bucket seats
• A/C, Heater
• Heated mirrors
• Rear work light
• AM/FM stereo
• Leaf-spring suspension
• Maxon 2500lbs capacity liftgate
• Deck size: 17-1/2’ x 7-1/2’, duel rear wheel
• (1) 42 Gallon side-mounted diesel tank
• Tire size: 215/75R17.5

Note: Certificate of Title and Transfer form will be mailed 3-4 weeks following the close of the auction. Buyer is fully responsible for all aspects of registration and fees due to DMV.

Item Description:

1991 Atlantic HDE 10' Hydraulic Press Brake (No Dies Included)

NOTE: Buyer is responsible for all aspects of removal. NO loading assistance.

• Model: HDE
• Serial: 56229
• Phase: 3
• Capacity: 120X10
• Peddle operated
• Note: Unit will be disconnected from electricity prior to removal. 

Item Description:

2017 Quincy QGS-10 All-in-one Rotary Screw Air Compressor/Dryer

• Air compressor:
• Model: QGS 10 D CSA/UL
• Hour meter reads: 1,443
• Serial: ITJ008369
• 3 Phase
• 125PSI
• 80 Gallon tank

Dryer Specifications:

• Model: DRYA3 5005
• Phase: 1
• Serial: ITJ008488

Item Description:

Tennsmith 48 4" Finger Brake

• Model: 48
• Serial: 15672

Item Description:

Piranha II 86 Ton Ironworker

• Model: II
• Capacity: 86 Ton

Item Description:

20' Long X 16' Wide Sea Container Building

Note: Sea Container must be picked up on Thursday, Septemeber 26th, 2019 between 2:00 pm to 3:30 pm.

• This is an outdoor building created by welding (2) open sided sea containers together with a steel plate. Buyer will be responsible for removing steel plates for loading.
• Building height: 100”
• Contents are not included

Item Description:

Atlantic HDE 225-16-10 CNC 16' Hydraulic Press Brake

NOTE: Buyer is responsible for all aspects of removal. NO loading assistance.

• Model: HDE 225-16-10
• CNC Controlled
• Haco ATL 585 Control box
• Phase: 3
• Serial: 8DE 225.16
• Shop footprint : 19’W x 6.5’L x 9’ Tall
• Note: Unit will be disconnected from electricity prior to removal. 

Item Description:

U.S. Industrial Machinery US 1050 10' Shear With Power Feed And Digital Readout

NOTE: Buyer is responsible for all aspects of removal. NO loading assistance.

• Model: US 1050
• Serial: J2005 049
• Roller Tables
• Capacity: .5” Thick
• 10” Long
• 3 phase
• Shop footprint: 13’W x 8’L x 6’ Tall
• Foot pedal-controlled
• Note: Unit will be disconnected from electricity prior to removal. 

Item Description:

Samson 510 CNC Plasma Cutting Table With Hypertherm Powermax 105 Plasma Cutter

Table:

• Manufacturer: Samson
• Model: 510
• Serial: 12165
• Table size: 10’ x 5’
• 110 V
• Single Phase

Includes:

• Hypertherm Powermax 105 plasma cutter (480 3 phase)
• Plasma CAM controller
• PC with software
• Spare parts
• The unit includes $1,500 of programs/software some of which demonstrated in last pictures
• Finished products that have been pictured are for the show of programs that come included with computer and software.

Item Description:

Piranha SEP 140 Ton Punch Press with Dies

NOTE: Buyer is responsible for all aspects of removal. NO loading assistance.

• Model: SEP 140
• Serial: 005
• Phase: 3
• Newly rebuilt hydraulics
• All dies included
• Capacity: 3” hole x .5” thick
• 1 9/16 gole x 1” thick

Item Description:

21' Storage Sea Container

Note: Sea Container must be picked up on Thursday, Septemeber 26th, 2019 between 2:00 pm to 3:30 pm.

• Contents not included
• Dimensions: 21’ long x 100” wide x 108” tall

Item Description:

21' Storage Sea Container

Note: Sea Container must be picked up on Thursday, Septemeber 26th, 2019 between 2:00 pm to 3:30 pm. 

• Contents NOT included

Item Description:

21' Storage Sea Container

Note: Sea Container must be picked up on Thursday, Septemeber 26th, 2019 between 2:00 pm to 3:30 pm.

• Contents NOT included
• Dimensions: 21’ long x 100” wide x 108” tall

Item Description:

21' Open Sided Storage Sea Container

Note: Sea Container must be picked up on Thursday, Septemeber 26th, 2019 between 2:00 pm to 3:30 pm.

• Contents not included
• Dimensions: 21’ long x 100” wide x 108” tall

Item Description:

21' Open Sided Storage Sea Container

Note: Sea Container must be picked up on Thursday, Septemeber 26th, 2019 between 2:00 pm to 3:30 pm.

• Contents not included
• Dimensions: 21’ long x 100” wide x 108” tall

Item Description:

21' Storage Sea Container

Note: Sea Container must be picked up on Thursday, Septemeber 26th, 2019 between 2:00 pm to 3:30 pm.

• Contents NOT included
• Dimensions: 21’ long x 100” wide x 108” tall

Item Description:

Toyota 5FGC254L 4,700 lb. Capacity Propane Forklift

• Model: 5FGC25
• Serial: 5FGCU25-79537
• Hour meter reads: 16,668
• Capacity: 4,700 lbs.
• Lift height: 185”
• Features: tilt/side shift
• Engine: Inline 4
• Fork length: 5’
• Tire type: solid
• Front tire size: 21×7×15
• Rear tire size: 18×6×21 1/8

Item Description:

Marvel PA13/3 Spartan Automatic Band Saw - Manufacturer's Information

• Model: PA13/3
• Serial: EPA130823
• Phase: 3
• Power vise
• Shuttle vise
• Single-cycle / Auto Cycle
• Coolant pump
• Work light
• Power frame up / frame down
• Adjustable blade speed
• Adjustable blade vertical speed
• Adjustable blade pressure
• Spare parts / Oil / Pictured tooling included
• Angle iron steel not included
• Note: Unit will be disconnected from electricity prior to removal. 

Item Description:

Marvel PA-13/2 Automatic Bandsaw

• Model: PA-13/2
• Power front/rear clamp
• Power feed
• Manual/Auto mode
• Variable speed blade
• 3 phase
• Note: Unit will be disconnected from electricity prior to removal. 

Item Description:

10' X 18" Roller Table

Item Description:

10' X 14" Roller Table

• Height: 31’

Item Description:

Marvel Series V10A2 Automatic Vertical Bandsaw With (2) Roller Tables

• Unit runs, however controls/switches need work
• Model: V10A2
• Serial: D-213510
• 3 phase
• 230 volt
• Adjustable feed force
• Power feed
• Power clamp
• Single/Auto mode
• Includes (2) roller tables

Item Description:

Metal Muncher MM100A-18 100 Ton Ironworker

• Model: MM100A-18
• Serial: 074010200
• 100 Ton
• 240 volt
• 3 phase
• Foot pedal operated
• Pictured dies included

Item Description:

Bridgeport Vertical Milling Machine With Power Feed And Digital Readout

• Serial: 47232
• Power feed
• Fagor digital readout
• One shot lube
• 3 phase
• Table dimensions: 48“x9”

Item Description:

Alba D36L Hydraulic Rebar Bender With Dies

• Model: D36L
• Serial: 4511570498
• 220V
• Single phase

Item Description:

Dayton 3Z326 Variable Speed Drill Press

• Model: 3Z326
• Serial: 28-0648

Item Description:

1998 Heltos VS32B-UL Heavy Duty Drill Press with Vise

• Model: VS32B-UL
• Serial: 9281
• 8.5” heavy-duty vise
• Unit height: 6.5’
• 3 Phase

Item Description:

Nelson Nelweld 4000 Stud Welder

• Model: Nelweld 4000
• Serial: 10002103
• Stud gun included
• 3 phase

Item Description:

Koike Sanso IK-600C Profile Plasma Cutting System (Plasma Cutter Not Included)

• Model: IK-600C
• Serial: 431
• Year: 1984
• Includes (2) electric exhaust fans
• Profile table surface area: 29“x36”

Item Description:

Jet 1440-3PGH Gear Head Engine Lathe

• Model: 1440-3PGH
• Stock No.: 321398
• Phase: 3
• Serial: JI129
• 3 Jaw chuck
• Tail stock
• Tool holder
• Swing: 16”
• Distance between centers: 36”

Item Description:

Hypertherm Powermax 1000 G3 Series Plasma Cutter With Cart, Torch And Fittings

• Model: powermax 1000
• Circle cutting guide included
• Gun included

Item Description:

Miller CP-200 Arc Welder With Wire Feeder, Gun And Cart

• Model: CP-200
• Wire feeder: Miller 60 series S-64
• Cart included
• Gun included

Item Description:

Lincoln Electric Invertec V350-Pro Welder With Wire Feeder and Stand

• Model: Invertec v350-Pro
• Wire feeder: lincoln LF-72
• Gun included

Item Description:

Miller Dynasty 300 DX TIG Welding Package

• Includes:
• Miller Dynasty 300 TIG welder
• Miller Coolmate 3 Cooling system
• Miller TigRunnger cart
• Miller Spoolmatic 30A Air Cooled Spool Gun
• Miller RFCS-14 HD Peddle
• (2) Tig guns
• Replacement hoses
• Accessories

Item Description:

Miller XMT 304 DC Arc Welder With Cart, Feeder, Leads, Gun And Accessories

• Model: XMT 304 CC/CC
• Miller S-22A feeder
• Cart included
• Gun included
• Hoses included

Item Description:

Miller CP-200 DC Welding Power Source With Wire Feeder, Cart And Gun

• Model: CP-200
• Wire feeder: miller millermatic S-52A
• Cart included
• Gun included

Item Description:

Miller Deltaweld 452 DC Power Source With Wire Feeder, Cart, And Gun

• Model: Deltaweld 452
• Wire feeder: Miller 60 series S-64
• Cart included
• Gun included

Item Description:

Miller Dimension 452 DC Welding Power Supple With Miller Feeder, Guns, And Welding Cart

• Unit Powers/Feeds (2) Welding guns
• Model: Dimension 452
• Feeder: Miller 70 Series D-74S 24v wire feeder
• Welding cart include
• (2) welding guns included

Item Description:

Port A Cool PAC2K482S 6' x 6' Swamp Cooler

• Fan Size: 4’
• Model: PAC2K482S
• Serial: 123184-06
• 115Volt

Item Description:

Compressed Oxy/Acetylene Torch Kit With Bottle Cart

• Includes:
• Acetylene bottle
• Oxygen bottle
• Gauges
• Torch
• Torch fittings
• Bottle cart
• Bittle caps

Item Description:

Ryobi GCV190 5 in 1 Pressure Washer

• Model: GCV190
• 3100psi
• 2.5GPM
• Honda motor

Item Description:

Bulk Lot: Assorted Shop Tools

• (Cart not included)

Item Description:

Metal Utility Shop Cart - Cart ONLY

• 4‘×3‘×2’
• Cart only (Contents not included)

Item Description:

Dyna-Flo KFA220DGD 180K or 220K BTU Kerosene Forced Air Delux Heater

• Model: KFA220DGD
• Serial: 1641AFF00323
• Phase 1
• Tank: 13gal

Item Description:

CordStrap Strapping Kit with Tensioner

• 3/4” polyester cord strapping kit
• Includes: Spool of cord, buckles, and tensioner

Item Description:

(4) Rolls Of ProWrap Heavy Duty Stretch Film

Item Description:

(5) Assorted Organizers And Hardware

Item Description:

Contents Of Shelf; Wire Feed, Hardware

Item Description:

Contents Of Shelf; Tooling, Holders

Item Description:

Contents of Shelf; Tool Holders, Vise, Punches

Item Description:

Contents Of Shelf; Punches, Tool Holders

Item Description:

Contents Of Shelf; Assorted Tool Holders

Item Description:

Contents Of Shelf; Assorted Tooling

Item Description:

Contents Of Shelf; Punches, Tool Holders

Item Description:

Shelf; (2) Machinery Foot Controls

Item Description:

Contents Of Shelf; Punches, Wire Feed, Tool Holder

Item Description:

(10) Spools Of Assorted Welding Wire