Online Auction of Plaster Casting Equipment, Paragon Kiln, Milling Machine, Lathe, and More

All items closed

(4) Bidding Reminders!

  1. In-person inspections are recommended as all items are sold "as-is"
  2. All bids are final when placed, no retractions
  3. Pay on time or a 15% penalty fee is applied
  4. Pickup during removal times only. No extensions or exceptions!

Bidders are bound by all terms and conditions of this auction when the first bid is placed, therefore, Bidders should not participate in the auction if they cannot comply with the stated auction terms. Please bid accordingly.

Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0$101$5
$101$1,000$10
$1,000$5,000$50
$5,000$50,000$100
$50,000$100,000$500
$100,000$100,000,000$1,000
LowHighIncrement
$0$100,000,000$1
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

G0759 Grizzly Milling Machine

  • Manufacturer: Grizzly
  • Model: G0759
  • HP: 1
  • Approximate Weight: 392
  • G0759 7” x 27” 1 HP Mill Drill with Stand and DRO
  • Upgrading America’s most popular mill drill.
  • The G0759 7” x 27” 1 HP Mill Drill upgrades America’s most popular mill drill with the addition of the 3-Axis DRO.
  • It is an affordable alternative to larger mill drills that offer similar features. It functions great as a dedicated single-purpose milling machine in a professional shop or as a starting point for those just expanding into milling operations.
  • With this machine you’ll get all the benefits of the G0704 plus exact tool and table positioning with the 3-axis DRO.
  • The variable-speed 1 HP motor powers the R-8 spindle from 50-1125 RPM in low and 100-2250 RPM in high. Spindle RPM can be monitored on the convenient digital readout. A clear chip guard on the spindle keeps debris from flying at the operator.
  • The G0759 has a large 7-1/16” x 26-5/8” table that can be moved by handwheels in both the longitudinal and cross directions. Both feed directions can be locked by table lock levers.
  • The G0759 also features tapered gibs with double locks which adds accuracy and rigidity, a dovetail column; and it comes with its own stand.
  • The G0759 manual was written by our U.S. based Technical Documentation Department and is packed with useful information.
  • The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill.
  • The Grizzly Customer Service and Technical Support Teams are U.S. based.
  • Parts and accessories for the mill drill are available online and shipped from the Grizzly parts warehouse in Springfield, MO.
  • Made in an ISO 9001 factory
  • SPECIFICATIONS:
    • Motor: 1 HP, 110V, single-phase, 12A
    • Spindle taper: R-8
    • Spindle travel: 2”
    • T-slots: 3 @ 2-1/2” centers, 7/16” wide
    • Head travel: 11”
    • Head tilt: 90° left & right
    • Max. distance spindle to table: 13”
    • Swing: 15”
    • Table travel (longitudinal): 18-7/8”
    • Table travel (cross): 5-1/2”
    • Table size: 7-1/16” x 26-5/8”
    • Spindle speed: Variable, 50-1125 RPM low, 100-2250 high
    • Floor-to-table height: 37-1/2”
    • Stand footprint: 15-3/4” x 16-1/2”
    • Approximate shipping weight: 392 lbs.
  • FEATURES:
    • 3-Axis DRO on spindle
    • Dovetail column
    • Fine feed head control
    • 2-Speed gearbox
    • Clear chip guard on spindle
    • Rubber chip guards on ways
    • Zero setting dials
    • Dials read inches
    • Safety shut off switch
    • Forward/Reverse switch
  • R8 cullets included
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

G0768Z Grizzly Lathe

  • G0768 8” x 16” Variable-Speed Benchtop Lathe
  • The Grizzly G0768 8” x 16” Variable-Speed Lathe is perfect for a sturdy workbench or as a stand-alone unit when mounted on the T26599 Optional Stand.
  • Features variable-speed spindle with high/low speed ranges, convenient quick-lock tailstock, reverse feed for cutting left-hand threads and a great selection of included standard equipment.
  • Motor: 3/4 HP, 110V, single-phase 10A
  • Swing over bed: 8-1/4”
  • Swing over cross slide: 4-5/8”
  • Swing over saddle: 6-7/8”
  • Distance between centers: 15-3/4”
  • Bed width: 4”
  • Spindle bore: 0.787” (20mm)
  • Spindle type: Intrinsic back plate
  • Spindle taper: MT#3
  • Tailstock taper: MT#2
  • Tailstock quill travel: 2”
  • Cross slide travel: 3”
  • Compound travel: 2-1/8”
  • Spindle speed: Variable, 50–2000 RPM
  • Longitudinal feeds: (2) 0.0037, 0.0068 in./rev.
  • Inch thread range: (15) 9–44 TPI
  • Metric thread range: (12) 0.4–3.0mm
  • Footprint: 10-1/2” x 31-1/2”
  • Overall dimensions: 36” W x 16” D x 14” H
  • Approximate shipping weight: 166 lbs.
  • FEATURES:
    • Electronic variable-speed spindle control with digital readout
    • High and low variable spindle speed ranges
    • Chip tray and backsplash guard
    • Thread dial indicator
    • Inch/metric dials
    • Emergency stop button
    • Quick-locking tailstock
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Paragon kiln

  • Year: 2013
  • Manufacturer: Paragon Industries L. P.
  • Model: j14
  • Serial Number: 437541
  • Voltage: 120
  • Watts: 2400
  • The digital Xpress J-14-1 is made of ceramic fiber for fast heating and cooling. The digital controller yields consistent quality. It is a real time-saver. Set the controller and spend your time working instead of monitoring the kiln. The firing chamber is a one-piece ceramic fiber shell with embedded elements.
  • For greater thermal efficiency, the space between the steel case and the ceramic fiber shell is filled with extra ceramic fiber insulation. The Xpress J-14 comes with a vent hole and steel cover in the door. The door seals tightly with a heavy spring latch. The controls, located in the base, stay cool for long life. No extra stand is needed. The Xpress J-14-1 is available with an optional wax tray for lost wax casting.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

King machinery Horizontal band saw

  • METAL CUTTING BANDSAW
  • Automatic shut-off switch
  • Can be used horizontally or vertically
  • Adjustable ball bearing guides
  • Portable design for easy movement
  • Table for vertical cutting included
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Flammable Cabinet Lockers (2)

  • First image:43×18×65
  • Third image:43×18×46
  • Contents not included
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Rust-oleum Striping Machine and (9) Cans of White Striping Paint

  • Make crisp, accurate stripes with the Rust-Oleum High Performance Striping Machine. Its heavy-duty wheels work on a variety of terrains and make applying straight lines fast and easy. Just collapse the handle to take it anywhere.
  • Covers a larger area in a shorter time
  • Adjustable for 2-4”-wide lines
  • Sturdy steel construction
  • Includes convenient storage compartment—holds up to 12 extra cans
  • Ideal for use on parking lots, roads, paths and more
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Across International Industrial chiller

  • Year: 2015
  • Manufacturer: Across International
  • Model: WAC-1
  • Serial Number: 2293300012082215
  • Voltage: 110
  • Capacity: 1935kcal/h
  • Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Across international Induction Heater and Foot Pedal

  • Across International IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating, cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel containers and more.
  • Mid-frequency induction heaters are the simplest in terms of design and implementation. With their low cost of ownership and maintenance, they are the most popular and reliable machines. The 15kW models are especially popular for their large power capacity and small footprint at an affordable price. This makes them standard equipment for many factories, labs and workshops where 230V AC is available.
  • Main Features
  • Ease of use: just plug in the power and connect the water cooling system, our simple instruction allows you to use the heater in 15 minutes.
  • Light weight, portable (with handle), instant heat and up to 90% energy savings.
  • Precise control with digital time and current displays.
  • Remote foot switch for safer operation.
  • Dual automatic and manual modes.
  • Optional graphite, MgO and SiO2 crucibles available (melting material decides crucible type, weight and size of the material decide crucible size)
  • Custom coil design available (fixed coil or coil on a cable so it can be used by hand like a wand)
  • Frequency is non-adjustable, it depends on the coil design (diameter of turns, numbers of turns, copper tubing diameter and total length).
  • ISO 9001:2008 registered manufacturer. We provide sample testing and custom made coils in our New Jersey facility.
  • Safety
  • Overvoltage protection
  • Overheat protection: if sensor detects heat radiator temperature is over 55°C, machine will shut down, overheat light will turn on and buzzer will sound continuously. Increase water pressure or lower water temperature until alarm goes off itself.
  • Overcurrent/malfunction protections: machine will shut down, indicator light turned on and buzzer sounds continuously if one of these situations occurs:
  • One of the machine parts becomes overheated
  • Interfering signal detected
  • Short circuit between work pieces and induction coils
  • Machine malfunctions
  • Induction coils touching each other
  • Input voltage is too low
  • Low water pressure protection: if water pressure goes below 29 PSI, machine will shut down, water protection light will turn on and buzzer will sound continuously.
  • 15KW Mid-Frequency Compact Induction Heater w/ Timers 30-80KHz, 208-240V, 50/60Hz, single-phase
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Handler MFG. CO. Polisher and Assorted Polish Wheels

  • Manufacturer: Handler
  • Serial Number: 325p278
  • HP: 1/2
  • Voltage: 115
  • This table-top polisher from HANDLER MFG features left and right tapered spindles and double-shaft 1/3 HP squirrel cage suction motor
  • Compact size for smaller spaces
  • 150 CFM
  • High-gauge steel construction with baked enamel finish
  • Dust collector with lighting.
  • Comes with one 10” x 13” x 2” fiber glass filter pre-installed
  • 13 1/2“W x 18” D x 10 1/8” H.
  • HANDLER is proud to have been a family-owned and operated American manufacturer since 1920.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Grobet Vacuum Table with Cart 

Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(2) O2 Tanks 

  • 50Lb
  • 30Lb
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Optomitry Chair

  • Old optomitry chair
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Buffalo 6” Bench Grinder

  • Manufacturer: Buffalo
  • Model Number: ULHG-6A
  • HP: 1/4
  • Voltage: 115
  • Model# B-6CB
  • 1/2 HP
  • 6” wheel
  • 110 Volt
  • 4 amp
  • 1 phase
  • Seller states: Fully Functional
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Charge Air Pro 2.5 gal Air Compressor

  • A DeVilbiss Air Power Company oil-free air compressor,
  • 1 HP, with 2 gauges.
  • Model no. IRFA125-2 ,
  • serial no. 9862034042
  • 125 PSI max.
  • Max RPM: 2800.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Oxy Acetylene Regulators

Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Toshiba Dehumidifiers

  • Electronic keypad interface and LED display provide easy control and monitoring.
  • Lights above icon symbols easily indicate which mode is currently active.
  • Min Temp: 41°F.
  • Max Temp: 89°F.
  • Included SJT type plug.
  • Keypad controls are: Filter Reset, Fan Speed Change, Increase Button, Pump Button, Decrease Button, Timer Button, and On/Off Button.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Assorted Machine Tools

Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Siemens Loadcenters

  • Siemens SN Series Load Center is the smart choice when value and quick installation are of highest priority. The SN Series load centers include labor saving features such as the ability to accept Plug-on neutral breakers, patented Insta-wire and mounting trim tabs. These exclusive features make the SN Series load center the best load center for the value minded contractor.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

High Temperature Sensor

  • Use in molten iron and steel alloys with or without slag for measuring melts in ladles and melt-pots. Stable readings are obtained in 6-8 seconds. Dipstick comes with one expendable tip.  60” length straight dipstick meter with RTC832 expendable tip, °C.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Wells Polishing lathe

  • 1/3hp 115V/60Hz
  • 1725/3450 RPM
  • Unit dimensions: 8 × 9 × 18” (approx)
  • Shipping weight: 50 lbs Shaft height: 5-1/4”
  • Same as Baldor 380WCT
  • Shipped with Q203 Accessory Kit
  • Assorted accesories included
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Wells Polishing Lathe

  • 1/3hp 115V/60Hz
  • 1725/3450 RPM
  • Unit dimensions: 8 × 9 × 18” (approx)
  • Shipping weight: 50 lbs Shaft height: 5-1/4”
  • Same as Baldor 380WCT
  • Shipped with Q203 Accessory Kit
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Vacuum Table

  • Three in one unit invests, casts perforated flasks, and regular flasks under vacuum. Investing is performed on a 10 1/2” square platform which can be vibrated to eliminate air and bubbles. Unit accommodates perforated flasks up to 5” in diameter and 7” high. Pressure created by the powerful vacuum unit pulls molten metal into the most intricate patterns. Vacuum assist casting can also be done on the unit with regular solid wall flasks.
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Work Table

  • Lower shelf, Cabinet. 6×2.5
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Decicators/Debubbler

  • 3 decicators, Vibrating degassing pad
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(5) Gavita Pro 1000 Watt E-Series DE Grow Light

  • The best just got better! The ‘e’ in ‘e-series’ stands for external control and the new Gavita Pro line e-series are improved models and are suitable for central control with the Gavita Master lighting controller . Now you can have complete lighting control at your fingertips.
  • Gavita Pro E-Series
  • These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. Gavita improved the electronics and changed the way the ballast is built, by mounting the PCB and warm components directly on the heat sinks instead of in a ballast bracket. The much cooler electronics result in a greater reliability and a longer life and the new design of the housing even increases that effect.
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(5) Gavita Pro 1000 Watt E-Series DE Grow Light

  • The best just got better! The ‘e’ in ‘e-series’ stands for external control and the new Gavita Pro line e-series are improved models and are suitable for central control with the Gavita Master lighting controller . Now you can have complete lighting control at your fingertips.
  • Gavita Pro E-Series
  • These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. Gavita improved the electronics and changed the way the ballast is built, by mounting the PCB and warm components directly on the heat sinks instead of in a ballast bracket. The much cooler electronics result in a greater reliability and a longer life and the new design of the housing even increases that effect.
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(5) Gavita Pro 1000 Watt E-Series DE Grow Light

  • The best just got better! The ‘e’ in ‘e-series’ stands for external control and the new Gavita Pro line e-series are improved models and are suitable for central control with the Gavita Master lighting controller . Now you can have complete lighting control at your fingertips.
  • Gavita Pro E-Series
  • These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. Gavita improved the electronics and changed the way the ballast is built, by mounting the PCB and warm components directly on the heat sinks instead of in a ballast bracket. The much cooler electronics result in a greater reliability and a longer life and the new design of the housing even increases that effect.
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(5) Gavita Pro 1000 Watt E-Series DE Grow Light

  • The best just got better! The ‘e’ in ‘e-series’ stands for external control and the new Gavita Pro line e-series are improved models and are suitable for central control with the Gavita Master lighting controller . Now you can have complete lighting control at your fingertips.
  • Gavita Pro E-Series
  • These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. Gavita improved the electronics and changed the way the ballast is built, by mounting the PCB and warm components directly on the heat sinks instead of in a ballast bracket. The much cooler electronics result in a greater reliability and a longer life and the new design of the housing even increases that effect.
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(6) White Plastic Grow Tubs 4x8

Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(6) White Plastic Grow Tubs 4x4

Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Plaster Casting Equipment

  • Assorted caps, Flasks, and Bowls
  • Quantity Outer Dia. Height
  • 2 3.5’ 4’
  • 3 4’ 4’
  • 3 4’ 6’
  • 2 4’ 7’
  • 2 5’ 7’
  • 1 custom 5×5×4 flask
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Photo Gallery

Item Description:

Table

  • 5×2 table with shelf on bottom and drawer
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Workbench Table

  • 4×2
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Workbench Table with attached outlet

  • 4×2
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Photo Gallery

Item Description:

Work Table

  • 5×2 table with shelf on bottom and drawer
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Kenmore Refridgerator

  • Stash away fresh and frozen food and snacks without worrying inside the stainless steel Kenmore Elite 24.1 cu. ft. bottom-freezer fridge. This fridge is designed for easy organization with adjustable shelving and door storage, even if you come home with way more groceries than you anticipated. Features like multi air flow technology and humidity-controlled crisper drawers keep your everyday foods in great shape, so you’ll always have what you need, right where you need it.
  • Contents not included
  • 31.5×33×68
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Wax Working Equipment

  • Ultra Waxer (2) Foot peddle (2) Ultra spatuala (2) Boxing wax strip box (2) Glass alcohol lamp (1) Bunsen burner (1) Wax cup (1) Various wax
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Dining Room Table

  • 6×3 Wood dining table, With 6 chairs
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Photo Gallery

Item Description:

Front Counter with storage shelfs

  • 10×2×3.5
  • Contents not included
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Photo Gallery

Item Description:

(7) Panasonic Office Phones

  • (7) Panasonic KX-DT333-B Basic Phone KX-DT333-B 101
  • (1) Meridian phone
Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Counter with storage space

  • 48×19×41
  • Contents not included
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Shore A hardness tester HT-6510A

  • HT-6510A
  • This digital shore A durometer is capable of measuring the hardness of rubber, elastomers and leather among other soft materials. The HT-6510A features maximum and average reading functions and includes a zero button for quick adjustment in the field.
  • Features
  • Shore A hardness tester designed to measure hardness of rubber, elastomers, natural rubber products, neoprene, polyester, resin, leather and soft PVC
  • Meets DIN 53505, ASTM D2240, ISO 7619 and JISK 7215
  • 4-digit, LCD display
  • Pocket-sized model with integrated probe
  • Maximum and Average functions
  • Zero adjustment button
  • Low battery indicator and auto shut off
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Large working table

  • 96×30
  • Small fan for smoke
  • Tool holders
  • Storage drawer
  • Power strip
  • Lights
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

UV curing machines

  • UV curing gun, UV curing Oven, Safety eyeware
Soft closes in effect: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Max Fan Pro Series (2)

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Office desks

  • Set of desks
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Photo Gallery

Item Description:

Office Desks

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Office Desks

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Office Desks

Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(28) Assorted Crucibles and Disposable Funnels

  • Various crucibles
Soft closes in effect: i
Item Location: San Leandro, CA 94577
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Assorted Personal Protective Equipment


Please wait...