Online Auction of Sheet Metal and Structural Steel Design Equipment

Online bidding on this auction starts Tue, May 11

This no reserve online auction features equipment from a millwright company in West Sacramento, CA. Spotlighting 11 lots including a vertical bandsaw, ironworker, lockformers, horizontal bandsaws, grinder, assorted dies, and more.

Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0$101$5
$101$1,000$10
$1,000$5,000$50
$5,000$50,000$100
$50,000$100,000$500
$100,000$100,000,000$1,000
LowHighIncrement
$0$100,000,000$1
Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Dake Johnson VH-24 Vertical Band Saw

  • Model Number: VH-24
  • Serial Number: 193718
  • AC Power: 3 Phase
  • Bed Size: 26-1/2” x 26-1/2”
  • Blade Size: 187”
  • TPS-25 Spot Welder
  • 3” grinder wheel
Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Buffalo No. 1/2 Universal Ironworker

  • Model Number: 1/2
  • AC Power: 3 Phase
  • Five Cutting/Punching Stations
  • Pneumatic System on all Actuator Stations (Aftermarket Installed)
  • Order No.: 46W6382
  • Capacities are based on 315 Carbon Steel
  • Shear 1/2" Plates, 6" x 5/8" Flats
  • Punch 1" x 5/8", or 7/8" x 3/4"
  • 1-1/2" Squares
  • Bar Cutter 4x4x1/2" Angles Sq., 3x3x5/16" Angles 45% Mtire
    • 3x3x3/8" Tees Sq.,  1 5/8" Rounds
    • 1-1/12" Squares
  • Built-in Notcher on Punch End 3x3x5/16" Angles, Flanges
    • of 4" to 6' Beams & 4" to 5" Channels
  • Built-in Notcher on Shear End  3x3x3/8" Angles, 3x3x3/8" Tees
    • 3/8" Plates Flanges of 3" to 6"
    • Beams and Channels
  • Built=in Coper on Shear End 3x3x3/8" Angles, 3x3x3/8 Tees: 3/8"
    • Plates, Flanges of 3" to 6" Beams
    • And Channels.
  • With Special Tool
    • B.C. Will Shear
      • 5" 12.25# Beams
      • 7" 12.5# Channels
      • 3 1/2x6x5/16" Angles (Square Only)
      • 3 1/2x5x3/8 Angles
      • 5x5x3/8" Angles (Flare)
  • H.P. Required: 3
  • R.P.M. 225 (Fly Wheel Speed)
Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Buffalo No. 1/2 Universal Ironworker

  • Model Number: 1/2
  • AC Power: 3 Phase
  • 3 H.P.
  • Five Cutting/Punching Stations
  • Mechanically Operated Ironwork/Foot Petal Actuator on all Stations
  • Order No.: 64z-7658
  • Capacities are based on Mild Steel - 60,000# T.S.
  • Shear 1/2" Plates, 6"x5/8" Flats
  • Punch 1 1/16"x5/8", OR 13/16x3/4"
  • Bar Cutter 4x4x1/2" Angles Sq., 2x3x5x16" Angles 45% Mitre
    • 3x3x3/8" Tees SQ., 1 5/8" Rounds,
    • 1-1/2" Squares
  • Built-in Notcher on Punch End 3x3x5/16" Angles, Flanges
    • of 4" to 6" Beams & 4" to 6" Channels
    • Tees - Flanges 8"x5/16"
    • Plates 5/16", Depth of Cut 2 3/4"
  • Built-in Coper on Shear End 3x3x3/8" Angles, 3x3x3/8" Tees;3/8"
    • Plates Flanges of 3" to 6" Beams
    • and Channels Cut 2" Wide x 3"
  • With Special Tools
  • B.C. Will Shear
    • 5" 12.25#Beams
    • 7" 12.25# Channels
    • 3 1/2x6x5/16" Angles (Square Only)
    • 2 1/2x5x3, 8" Angles (Square Only)
  • H.P. Required - 3 R.P.M. 310 (Fly Wheel Speed)
    • Punch & bar cutter blades should be oiled
    • Do not oil shear blades
      For replacements refer to order number
Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Lockformer 18 Gauge Pittsburgh Machine

  • Serial: TR 8677
Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Lockformer / Cliprol 1-1/8 Roll Forming Machine 22 Gauge

  • Model: 1-1/8
  • Serial: 1162
Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

JET HBS-10M 10” Horizontal Bandsaw

  • Model Number: HBS-10M
  • Serial Number: 01104
  • AC Power: 3 Phase
  • Blade Size: 12’6” X 1”
Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

Baldor 1-1/2 H.P. Grinder with Table

  • Model Number: 1021W
  • Serial: F689
  • AC Power: 3 Phase
Soft closes in effect: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Lockformer 20 Gauge Flange Machine

  • Serial: 1492
Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

High-Capacity Shaft Balancer 5-3/4 with Covers

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

High Capacity Shaft Balancer with Covers

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

(37) Assorted Dies and Punches for Ironworkers

Soft closes in effect: i
Click to view Item Photo Gallery

Item Description:

(130) Threaded Rods 5/8"-11 x 120"


Please wait...